Self Aligning Roller Bearing

22310-EK-SKF

Inside diameter 50
Outside diameter 110
Thickness 40

Part number : 22310-EK-SKF

SKF

Description

The Self Aligning Roller Bearing, known as 22310-EK-SKF SKF, has an inner diameter of 50 mm, an outer diameter of 110 mm and a thickness of 40 mm.

See data sheet

What is a self aligning bearing?

You can find all the information you need about our products in our expert's advice, by clicking here Here

Your price: £102.78 INCL. VAT

  Arrive dans 7 jours

product_sheet product_sheet product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment
picto_need_help

Need help or advice?

02038.087.274

Description

The Self Aligning Roller Bearing, known as 22310-EK-SKF SKF, has an inner diameter of 50 mm, an outer diameter of 110 mm and a thickness of 40 mm.

See data sheet

What is a self aligning bearing?

You can find all the information you need about our products in our expert's advice, by clicking here Here

product_sheet product_sheet product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment
picto_need_help

Need help or advice?

02038.087.274

CUSTOMERS ALSO BOUGHT

TECHNICAL DATA

Brand SKF
GTIN Marque 7316571551678
Inside diameter 50 mm
Outside diameter 110 mm
Thickness 40 mm
Limiting speed 4 800 rpm
Weight 1 824 g
Dynamic load 220 000 kN
Static load 224 000 kN
Packaging 1

PRODUCT DESCRIPTION

The Self Aligning Roller Bearing, known as 22310-EK-SKF SKF, has an inner diameter of 50 mm, an outer diameter of 110 mm and a thickness of 40 mm.

EXPERT ADVICE

What is a self aligning bearing?

A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment. These bearings are regularly located in grinders or agricultural machines, regularly placed in cast iron SN bearings, with a shim washer and seals specific to these bearings. Attention, there are 2 important variants: • The cylindrical bore bearing, which will be mounted directly on the shaft, in force
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.
The tapered bore is indicated by the letter K in the reference.

What does the letter K mean in the reference?

The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.

CUSTOMER REVIEWS