Deep Groove Ball Bearing

6215-2RS-SKF

Deep Groove Ball Bearing

6215-2RS-SKF

IN_Dimension_Rlts 75 OUT_Dimension_Rlts 130 EP_Dimension_Rlts 25

Shopping basket : 6215-2RS-SKF

Description

Deep Groove Ball Bearing 6215-2RS-SKF, Inner diam. 75 mm, Outer diam. 130 mm, Width 25 mm

See the data sheet

What do the suffixes mean?

You can find all the additional information relating to product questions by consulting our expert advice, by clicking Here

UNIT PRICE: £52.98

4 items in stock

logo_chrono
2 days delivery by air freight
Shipping in      
Minimum shipping costs 11.34 £ In. VAT
product_sheet product_sheet product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment
picto_need_help

Need help or advice?

02038.087.274

UNIT PRICE: £52.98

4 items in stock

IN_Dimension_Rlts 75 OUT_Dimension_Rlts 130 EP_Dimension_Rlts 25

logo_chrono
2 days delivery by air freight
Shipping in      
Minimum shipping costs 9.45 £

Description

Deep Groove Ball Bearing 6215-2RS-SKF, Inner diam. 75 mm, Outer diam. 130 mm, Width 25 mm

See the data sheet

What do the suffixes mean?

You can find all the additional information relating to product questions by consulting our expert advice, by clicking Here

product_sheet product_sheet product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment
picto_need_help

Need help or advice?

02038.087.274

COMPLEMENTARY PRODUCTS

DATASHEET

Brand SKF
Weight 1,233 kg
section Deep Groove Ball Bearing
N° Ean13 3663952014500
Inner diameter 75,0 mm
Outer diameter 130,0 mm
Width 25,0 mm
Product Ref 6215-2RS-SKF
Stock 4
fiche_technique

PRODUCT DESCRIPTION

Deep Groove Ball Bearing 6215-2RS-SKF, Inner diam. 75 mm, Outer diam. 130 mm, Width 25 mm

THE EXPERT ADVICE

What do the suffixes mean?

RS, 2RS, 2RSH, 2RS1, RSR, 2RSR, E, EE, LLU, LLB, DU, DDU

These suffixes mean "with 1 or 2 rubber gaskets". At 123Bearing, we specify with the number "2" when the bearing is sealed on both sides

C3, C4

Means "increased internal game". Often referred to as high speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. WARNING, an increased internal clearance bearing will not operate optimally at low speeds. We invite you to refer to the technical data sheet of the desired bearing to know its speed limit.

ZZ, 2Z, ZR, Z

These suffixes mean "with 1 or 2 sheet metal baffles" for dustproofing. At 123Bearing, we specify if the bearing is waterproof on both sides with "ZZ".

TN9, TVH, TVP, G15

These suffixes indicate that the cage (part of the bearing that keeps the balls at a distance from each other) is made of polymer material. In general made of fiberglass-reinforced polyamide.

ABEC

The ABEC standard is used to classify bearings by their machining tolerance. This standard is regularly called into question because it does not include certain important technologies to guarantee a good functioning, as well for the efficiency as for the lifetime of a bearing.
This standard is thus little used by123Bearing.

BHT / VT

This suffix indicates that the bearing is designed for very high operating temperatures. In general, it is indicated the temperature following this suffix.
Attention, these bearings are not adapted to all the uses, and will require a high temperature for an optimal lifetime.

How do I know if my bearing is stainless steel?

A stainless steel bearing is usually magnetisable, because it is a stainless steel AISI 420, harder and more shock resistant than the current stainless steel (AISI 304).
To check if your bearing is stainless steel, just read the reference engraved on the side of the bearing. This reference must begin with the prefix "S" meaning "Stainless Steel".

What is the difference between all the choices I have for my reference (example 6205-2RS)?

Some bearings exist with more or less important variants (large or small internal clearance, special grease, very high temperature, etc ...). These variants are always indicated by prefixes and suffixes in the reference.
For example, the suffix "2RS" means that the bearing is watertight, thanks to a sealing flange on both sides of the bearing.
The suffix "C3" will mean that the bearing has an increased internal clearance, and that it will require a higher operating temperature, or a higher rotational speed.

CUSTOMERS' OPINION

4600 sqm of storage space
7.2 million parts in stock
Our strengths
personalized delivery
a business solutions department

4600 sqm of storage space

7.2 million parts in stock

Our strengths

personalized delivery

a business solutions department